Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cooling
Model Year: 2008 Model: Sequoia Doc ID: RM000002BGI00RX
Title: 2UZ-FE COOLING: RADIATOR: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER 2UZ-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+

2. DRAIN ENGINE COOLANT 2UZ-FE COOLING: COOLANT: REPLACEMENT (2008 Sequoia)+

3. REMOVE FRONT BUMPER COVER

(a) Remove the front bumper cover EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 Sequoia) .

4. REMOVE RADIATOR SIDE DEFLECTOR LH



(a) Remove the 6 clips and side deflector.

(b) Disconnect the wire harness clamp.

5. REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Trailer Towing System)



(a) Remove the 6 clips and side deflector.

6. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY 2UZ-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL (2008 Sequoia)+

7. REMOVE AIR CLEANER HOSE ASSEMBLY 2UZ-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL (2008 Sequoia)+

8. REMOVE INLET RADIATOR HOSE



(a) Remove the inlet radiator hose.

9. REMOVE FAN SHROUD (w/ Trailer Towing System)



(a) Loosen the 4 nuts holding the fluid coupling fan.

(b) Remove the fan and generator V-belt 2UZ-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL (2008 Sequoia)+ .

(c) Detach the claw to open the No. 1 flexible hose clamp.

(d) Disconnect the reservoir hose.

(e) Remove the 2 bolts holding the fan shroud.

(f) Remove the 4 nuts of the fluid coupling fan, and then remove the fan shroud together with the fluid coupling fan.

NOTICE:

Be careful not to damage the radiator core.

(g) Remove the fan pulley from the water pump.

10. REMOVE FAN SHROUD (w/o Trailer Towing System)



(a) Loosen the 4 nuts holding the fluid coupling fan.

(b) Remove the fan and generator V belt 2UZ-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL (2008 Sequoia)+ .

(c) Disconnect the reservoir hose.

(d) Remove the 2 bolts holding the fan shroud.

(e) Remove the 4 nuts of the fluid coupling fan, and then remove the fan shroud together with the fluid coupling fan.

NOTICE:

Be careful not to damage the radiator core.

(f) Remove the fan pulley from the water pump.

11. REMOVE OIL COOLER ASSEMBLY (w/ Trailer Towing System) A750F AUTOMATIC TRANSMISSION / TRANSAXLE: AIR COOLED OIL COOLER: REMOVAL (2008 Sequoia)+

12. DISCONNECT OUTLET RADIATOR HOSE



(a) Disconnect the outlet radiator hose.

13. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL



(a) Remove the 3 clips and No. 1 radiator to support seal.

14. REMOVE RADIATOR ASSEMBLY

(a) Remove the 4 bolts and radiator assembly.

15. REMOVE OUTLET RADIATOR HOSE

(a) Remove the outlet radiator hose from the radiator assembly.

16. REMOVE RADIATOR DRAIN COCK PLUG

(a) Remove the radiator drain cock plug from the radiator assembly.